Momentary vs Latching: The Core Difference
The main distinction between a push button and a tact switch is how they behave when you release them. A non-latching (momentary) switch only completes the circuit while you hold it down. Once you let go, the circuit breaks. A latching switch stays in its last position until you press it again.
For projects that need a temporary action—like a doorbell, a test trigger, or a keyboard key—a momentary switch is the natural fit. For toggling a mode or turning a light on and off, a latching switch is more convenient.
Two Momentary Switches Compared
- Non-Latching Rectangle Push Button Switch DC 12V (Red): Non-latching (momentary) action: the switch only makes contact while pressed. Rated for DC 12V operation. This is a classic push button—press to activate, release to stop. Its 12V rating suits low-voltage control panels and hobby circuits.

Non-Latching Rectangle Push Button Switch DC 12V (Red) - 4-Pin 6x6mm Tact Switch with Extended Button: Momentary 6mm x 6mm tact switch with 4 DIP pins and a long 6mm switch. Dimensions: 6 x 6 x 9.5mm. Much smaller than a standard push button, this tact switch fits into tight breadboard or panel spaces. The 4-pin DIP layout makes it easy to solder into compact prototypes.

4-Pin 6x6mm Tact Switch with Extended Button
Push Button vs Tact Switch: Key Differences
- Size and Mounting: The rectangle push button is a larger, panel-mount component with a red actuator you can press with a finger. The 6x6mm tact switch is tiny—designed for PCB or breadboard mounting with DIP pins.
- Action Type: Both are momentary (non-latching), but the push button returns to its default state when released, while the tact switch also springs back. Neither stays pressed.
- Voltage Rating: The push button is rated for DC 12V. The tact switch has no supplied voltage rating—you must check your circuit's requirements and the switch's actual limits before use.
- Latching Option: If you need a switch that stays on, consider a latching tact switch. The 7mm x 7mm locking tact switch (pack of 10) offers a latching version that holds its position until pressed again.
When a Micro Switch Fills a Different Role
A 3-pin micro switch, like the one rated for 125V and 1A, is designed for higher-power or mains-voltage applications. It's larger than a tact switch and uses screw terminals or spade connectors rather than DIP pins. If your project involves more than low-voltage DC, a micro switch may be the safer choice—but it's a different form factor and mounting style, not a direct substitute for a push button or tact switch.
Choosing Based on Your Build
For a control panel with plenty of space and a need for a clear, finger-friendly button, the rectangle push button (12V) is straightforward. For a compact prototype or a board with limited real estate, a 6x6mm tact switch saves space and solders directly onto a breadboard. If you want a latching action, look for a locking tact switch like the 7mm x 7mm version. Always verify voltage and current ratings against your circuit's requirements—especially when using a switch without a supplied rating.



