Two DIL-16 logic chips, two different jobs
The 74HC161B1R and the SN74HC139N sit in the same 74HC logic family and even arrive in the same DIL-16 package, so it is tempting to treat them as interchangeable spares. They are not. One counts; the other routes. Your choice depends on whether your circuit needs to advance through a sequence of states or to select one of several destinations from a coded input.
This comparison sticks to what the catalog records confirm for each part, and flags where you will need your own datasheet reading before you commit a design.
What the catalog confirms about each part
- 74HC161B1R Synchronous Binary Counter: The M74HC161 is a high speed CMOS 4-bit synchronous presettable binary counter in a DIL-16 package from the 74HC range. The 4-bit, presettable, synchronous description is the core of what this chip does: it steps through binary states in step with a clock and can be loaded with a starting value.

74HC161B1R Synchronous Binary Counter - SN74HC139N - Decoder / Demultiplexer: The SN74HC139N is a 2-to-4 dual decoder/demultiplexer designed for high-performance memory-decoding or data-routing applications requiring very short propagation delay times. This tells you the chip's purpose is selection and routing, not counting, and that speed of response is the design concern it targets.

SN74HC139N - Decoder / Demultiplexer
Counter vs decoder: how the roles differ
Both parts take logic inputs and produce logic outputs, but the relationship between input and output is fundamentally different.
- Input meaning: On the 74HC161, the clock input advances an internal count, and the preset inputs load a value. On the SN74HC139N, a 2-bit code selects one of four outputs per decoder, so the input is an address rather than a step.
- Output behaviour: The counter presents its state as a binary pattern that changes over time. The dual decoder activates a selected output line, which is what makes it useful for memory decoding and data routing.
- Two halves vs one counter: The SN74HC139N is described as dual, meaning two 2-to-4 decoders in one package. The 74HC161 is a single 4-bit counter. That difference affects how many signals one package can serve.
- Where speed matters: The SN74HC139N record highlights very short propagation delay for memory-decoding duties. The 74HC161 record emphasises synchronous counting and presettability rather than delay figures.
When the 74HC161 synchronous counter is the right pick
Reach for the 74HC161B1R when your circuit needs to move through a defined sequence of binary states on a clock, or when you want to start counting from a chosen value rather than from zero. The presettable, synchronous nature of the part is the reason to choose it over a simpler ripple counter: the catalog describes it as a 4-bit synchronous presettable binary counter, so the design intent is controlled, clocked state progression.
If your project instead needs to take a coded input and switch on one of several lines, the counter is the wrong tool regardless of package similarity.
When the SN74HC139N decoder fits better
Choose the SN74HC139N when the task is decoding or routing: turning a small binary code into a single active output, or distributing a signal to one of several destinations. The catalog positions it for memory-decoding and data-routing work where short propagation delay matters, and notes that in high-performance memory systems these decoders can minimise the effects of system decoding.
Because the part is dual, one package gives you two independent 2-to-4 decoders, which can simplify a board that would otherwise need two separate chips.
Selection checks before you order either part
- Does your signal need to advance or to select?: Advancing through states points to the 74HC161. Selecting one of several lines from a code points to the SN74HC139N.
- Do you need presettable counting?: The 74HC161 record confirms a presettable 4-bit counter. If loading a start value is part of your design, that feature matters.
- Do you need two decoders in one package?: The SN74HC139N is a dual 2-to-4 decoder/demultiplexer, so it can serve two decoding tasks at once.
- Is package compatibility enough?: No. Both are DIL-16, but the pin functions differ by design. Match the pinout to your schematic rather than assuming a drop-in swap.
What the supplied records do not settle
The catalog entries do not include supply voltage ranges, absolute maximum ratings, timing tables, pinout diagrams, or operating instructions for either part. That absence is a limit of the supplied evidence, not a statement that the manufacturer omits such data. Before you finalise a design, read the full datasheet for the exact orderable part, confirm the pin assignments against your schematic, and verify the logic levels your surrounding circuitry expects.
If your decision hinges on a specific timing figure or a voltage threshold, treat the catalog summary as a starting point and the datasheet as the authority.


