The real difference is the package, not the microcontroller
Both boards use the LGT8F328P, a microcontroller described in the catalog as a low-cost replacement for the ATmega328 with improvements such as higher-resolution ADCs, a DAC, a built-in unique serial number (GUID), and sketch execution at over twice the speed of the Nano. The SSOP20 board carries the SSOP20 package; the QFT32 board carries the QFP32 package (the catalog title uses QFT32).
That package difference is the practical decision point. The catalog does not supply pinout diagrams, pin counts, or setup steps for either board, so you cannot assume the two are pin-for-pin interchangeable or that either matches an Arduino Pro Mini or Nano footprint. Treat the package name as a starting clue for your own board inspection, not a wiring guarantee.
What the catalog confirms about each board
- LG8F328P SSOP20 mini EVB development board: LG8F328P SSOP20 mini EVB development board, catalog price USD 0.76 (comparison price USD 1.24), Standard variant. The SSOP20 package is the smaller-package option in this pair, and the listed price is the higher of the two at catalog time.

LG8F328P SSOP20 mini EVB development board - LG8F328P QFT32 mini EVB development board: LG8F328P QFT32 mini EVB development board, catalog price USD 0.73 (comparison price USD 1.16), Standard variant. The QFP32 package is the other option, listed slightly cheaper than the SSOP20 board in the catalog.

LG8F328P QFT32 mini EVB development board - LG8F328P SSOP20 mini EVB development board: Intended as a very low cost alternative to embedded Arduino boards such as the Pro Mini. Both boards target the same low-cost role, so price and package are the main separators, not a different feature set.
- LG8F328P QFT32 mini EVB development board: Uses the LG8F328P (QFP32) microcontroller instead of the Nano's ATmega328P. The microcontroller family is shared with the SSOP20 board; the package is what changes.
SSOP20 vs QFP32: what changes for your build
The catalog does not provide pinouts or dimensions, so the comparison below is limited to what is confirmed. Use it to frame your own inspection of the physical board.
- Package and footprint: SSOP20 is a 20-pin small-outline package; QFP32 is a 32-pin quad flat package. The catalog does not confirm board dimensions or pin spacing, so check the physical board before designing an enclosure or adapter.
- Pin availability: The QFP32 package name suggests more pins than SSOP20, but the catalog does not list which pins are broken out on either mini EVB. Do not assume a pin exists on one board because it exists on the other.
- Price: At catalog prices, the QFT32 board is USD 0.73 and the SSOP20 board is USD 0.76. The difference is small; choose on package fit and availability rather than price alone.
- Setup and programming: The catalog supplies no preparation or operating instructions for either board. Programming method, bootloader, and header arrangement are not confirmed here, so plan to verify them against the board you receive.
How to choose when the pinout is not published
Start with the physical constraint. If your project already has a socket, adapter, or protoboard footprint, measure it and compare with the board you are considering. The SSOP20 board is the one to inspect if your design assumes a narrower 20-pin package; the QFT32 board is the one to inspect if you need the larger package's pin count. Neither assumption is confirmed by the catalog.
If you are prototyping on a breadboard with no fixed footprint, the QFT32 board's lower catalog price and larger package name make it a reasonable first purchase, but only if you are prepared to map its pins yourself. The SSOP20 board is equally valid if your workspace or adapter favors the smaller package. Because the catalog omits pinout and setup details, buy one board first, document its pinout with a multimeter and a simple sketch, and only then commit to a second board or a custom PCB.
Checks to run before you commit
- Confirm the package on the board you receive: The catalog title uses QFT32 while the description says QFP32; verify the marking on the physical board rather than relying on the listing name.
- Map the broken-out pins yourself: The catalog does not publish a pinout for either mini EVB. Trace each header to the microcontroller before wiring peripherals.
- Verify programming compatibility: The catalog does not confirm the programming interface or bootloader. Test with your intended toolchain before soldering the board into a project.
- Treat the LGT8F328P improvements as claims to validate: Higher-resolution ADCs, a DAC, a GUID, and faster sketch execution are catalog descriptions. Confirm the features you depend on with your own test sketch.


