返回部落格
比較分析 2026-11-20 Official Hobby Components Online Store | Buy Electronic Kits, Components, Boards, Shields, Modules 0 瀏覽

Push Button vs Tact Switch: Which One for Your Project?

Push Button vs Tact Switch: Which One for Your Project?

Compare push buttons and tact switches for your electronics project. Learn about momentary vs latching action, size, and voltage ratings to choose the right switch.

Momentary vs Latching: The Core Difference

The main distinction between a push button and a tact switch is how they behave when you release them. A non-latching (momentary) switch only completes the circuit while you hold it down. Once you let go, the circuit breaks. A latching switch stays in its last position until you press it again.

For projects that need a temporary action—like a doorbell, a test trigger, or a keyboard key—a momentary switch is the natural fit. For toggling a mode or turning a light on and off, a latching switch is more convenient.

Two Momentary Switches Compared

  • Non-Latching Rectangle Push Button Switch DC 12V (Red): Non-latching (momentary) action: the switch only makes contact while pressed. Rated for DC 12V operation. This is a classic push button—press to activate, release to stop. Its 12V rating suits low-voltage control panels and hobby circuits.
    Non-Latching Rectangle Push Button Switch DC 12V (Red)
    Non-Latching Rectangle Push Button Switch DC 12V (Red)
  • 4-Pin 6x6mm Tact Switch with Extended Button: Momentary 6mm x 6mm tact switch with 4 DIP pins and a long 6mm switch. Dimensions: 6 x 6 x 9.5mm. Much smaller than a standard push button, this tact switch fits into tight breadboard or panel spaces. The 4-pin DIP layout makes it easy to solder into compact prototypes.
    4-Pin 6x6mm Tact Switch with Extended Button
    4-Pin 6x6mm Tact Switch with Extended Button

Push Button vs Tact Switch: Key Differences

  • Size and Mounting: The rectangle push button is a larger, panel-mount component with a red actuator you can press with a finger. The 6x6mm tact switch is tiny—designed for PCB or breadboard mounting with DIP pins.
  • Action Type: Both are momentary (non-latching), but the push button returns to its default state when released, while the tact switch also springs back. Neither stays pressed.
  • Voltage Rating: The push button is rated for DC 12V. The tact switch has no supplied voltage rating—you must check your circuit's requirements and the switch's actual limits before use.
  • Latching Option: If you need a switch that stays on, consider a latching tact switch. The 7mm x 7mm locking tact switch (pack of 10) offers a latching version that holds its position until pressed again.

When a Micro Switch Fills a Different Role

A 3-pin micro switch, like the one rated for 125V and 1A, is designed for higher-power or mains-voltage applications. It's larger than a tact switch and uses screw terminals or spade connectors rather than DIP pins. If your project involves more than low-voltage DC, a micro switch may be the safer choice—but it's a different form factor and mounting style, not a direct substitute for a push button or tact switch.

Choosing Based on Your Build

For a control panel with plenty of space and a need for a clear, finger-friendly button, the rectangle push button (12V) is straightforward. For a compact prototype or a board with limited real estate, a 6x6mm tact switch saves space and solders directly onto a breadboard. If you want a latching action, look for a locking tact switch like the 7mm x 7mm version. Always verify voltage and current ratings against your circuit's requirements—especially when using a switch without a supplied rating.

相關文章

Customer Service
首頁
商品
購物車
我的