Official Hobby Components Online Store | Buy Electronic Kits, Components, Boards, Shields, Modules

3.5mm Jack Socket PJ-3004A2

3.5mm Jack Socket PJ-3004A2 - Main image
$0.1 $0.16 In stock

Category: Connecteurs

Température : -30~70 °C
Charge nominale : DC 30 V 0.5 A
Résistance de contact : <0.03 ohm
Résistance d'isolement >100 M ohm
Tension de tenue : AC 500 V (50 Hz) 1 min
Force d'insertion et d'extraction : 3-20 N

Dimensions disponibles sur notre forum d'assistance.

Vérifier votre choix

Les moyens de paiement et le total final s’affichent au paiement.

Délais de livraison

Prévoyez le temps de préparation et de transport.

Standard Shipping: Préparation (jours ouvrés) 0–1; Transport (jours ouvrés) 7–15.

Express Shipping: Préparation (jours ouvrés) 0–1; Transport (jours ouvrés) 7–15.

Voir les conditions
Questions de remboursement

Contactez la boutique avec votre numéro de commande pour demander un remboursement.

Contactez-nous pour connaître le délai de remboursement avant le retour.

Voir les conditions
Coût de l’expédition

Vérifiez le tarif pour votre destination et le service choisi.

Standard Shipping · États-Unis: 0,00 $US

Express Shipping · États-Unis: 3,99 $US

Voir les conditions
Préparer un retour

Vérifiez les conditions avant de renvoyer un article.

États-Unis · Délai de retour (jours après réception): 30. Mode de retour: Par courrier. Frais de retour: À la charge du vendeur.

Voir les conditions

Customer Reviews (4.4 / 5 · 5 reviews)

Evelyn B. ★★★★★

Finally fixed that intermittent audio in my portable radio - the contact resistance being under 0.03 ohm really made a difference in signal clarity. The insertion force feels just right, not too loose.

Kevin Q. ★★★★★

Fits snugly into the PCB holes and the 3-20N insertion force feels just right, not too stiff or loose. Soldered it into a small audio project and the contact resistance is low enough that I get zero crackle or hum.

Richard ★★★★☆

Took a chance on these to repair an old amp and the 3-20N insertion force feels just right, not too loose or stiff. Solder joints held up fine and the contact resistance spec seems solid so far, though the housing is a bit more compact than I'd have liked for my fat fingers.