Start with how many buttons your project actually needs
The choice between a 1x4 and a 1x6 membrane keypad comes down to one question: do you need four buttons or six? Both are ultra-thin membrane keypads with self-adhesive backing for flat surfaces, and both use a flat ribbon cable ending in a standard 0.1" pitch Dupont-style connector. That shared foundation makes the decision mostly about key count, cable length, and whether you want an integrated LED.
If your interface only needs four functions—say, up, down, select, and back—the 1x4 is the leaner option. If you need six distinct inputs or want a built-in indicator LED, the 1x6 gives you two extra keys and an LED without changing the mounting approach.
Catalog facts that separate the two keypads
- 1 x 4 Matrix Membrane Keypad: 1 x 4 Matrix Membrane Keypad (HCPROJ0005) has a 72mm flat ribbon cable providing access to all 4 buttons, with a standard 0.1" pitch connector. The 72mm cable sets the reach from the keypad to your microcontroller or header; check that it spans your enclosure before you commit.

1 x 4 Matrix Membrane Keypad - 1 x 6 Matrix Membrane Keypad: 1 x 6 Matrix Membrane Keypad (HCPROJ0007) has a 96mm flat ribbon cable providing access to all 6 buttons including the built-in LED, with a standard 0.1" pitch Dupont-style connector. The longer 96mm cable gives more routing flexibility, and the integrated LED adds a status indicator you would otherwise wire separately.

1 x 6 Matrix Membrane Keypad
Side-by-side: 1x4 vs 1x6 membrane keypad
- Key count: 1x4 offers four buttons; 1x6 offers six buttons. Choose based on the number of distinct functions you need to expose.
- Cable length: The 1x4 uses a 72mm ribbon cable; the 1x6 uses a 96mm ribbon cable. Longer cable can ease routing but may require more careful strain relief.
- Integrated LED: The 1x6 includes a built-in LED; the 1x4 does not list one in the supplied information. If you need a status light, the 1x6 saves you from adding a separate LED.
- Connector: Both terminate in a standard 0.1" pitch connector, so they can plug into the same style of header or breadboard.
- Mounting: Both are ultra-thin with self-adhesive backing for flat surfaces, so the mounting method is identical.
When the 1x4 membrane keypad is the better fit
Pick the 1x4 when your interface is genuinely four functions or fewer. A compact control panel for a test jig, a simple menu navigator, or a dedicated macro pad often needs only four keys. The shorter 72mm cable is an advantage in tight enclosures because there is less excess ribbon to manage, and the lower key count keeps your wiring and code simpler.
Keep in mind that the 1x4 does not include an integrated LED according to the supplied record. If you want visual feedback, plan for a separate indicator or rely on your microcontroller's onboard LED.
When the 1x6 matrix membrane keypad earns its extra keys
The 1x6 makes sense when you need five or six inputs, or when you want the built-in LED for status without adding another component. Six keys cover common needs like numeric entry plus enter and clear, or a small media controller with play, pause, next, previous, volume up, and volume down.
The 96mm cable gives you a bit more slack for routing around standoffs or enclosure walls. Just remember that the LED is integrated into the membrane, so your wiring will need to account for it—the supplied information does not specify the LED's electrical characteristics, so check the product page or datasheet before connecting power.
Shared specs that simplify your decision
- 1 x 4 Matrix Membrane Keypad: 1 x 4 Matrix Membrane Keypad is an ultra-thin design with self-adhesive backing for easy attachment to most flat surfaces. If you have a flat panel, you can mount either keypad the same way—no screws or cutouts required.
- 1 x 6 Matrix Membrane Keypad: 1 x 6 Matrix Membrane Keypad is also an ultra-thin design with self-adhesive backing for easy attachment to most flat surfaces. The mounting approach does not change with key count, so you can base your choice purely on keys, cable, and LED.
Wiring and code: what stays the same, what changes
Both keypads present their buttons on a 0.1" pitch connector, which means they can plug directly into a breadboard or female header. For row-column wiring, you will typically connect each button between a microcontroller pin and ground, using the internal pull-up resistors. The exact pin mapping depends on the keypad's internal matrix; the supplied information does not include a pinout diagram, so consult the product page or test continuity with a multimeter before soldering.
In code, the 1x4 needs four input pins (or a resistor ladder on one analog pin if you prefer), while the 1x6 needs six. If you use the 1x6's LED, you will also need a digital output pin and a current-limiting resistor—but again, verify the LED's forward voltage and current from the datasheet, as the catalog does not state them.
What the catalog does not confirm
The supplied records do not list electrical ratings, actuation force, or operating temperature for either keypad. They also do not confirm compatibility with specific Arduino boards or libraries beyond the physical connector. Treat the 0.1" pitch as a mechanical starting point and verify signal behavior with your own test before finalizing an enclosure. If your project depends on a particular membrane keypad for Arduino tutorials, check that the tutorial's pin assumptions match the keypad you buy—especially for the 1x6, where the LED adds an extra connection.


